Name: XC17S50AVO8C
Brand: Xilinx
SKU: XC17S50AVO8C

XC17S50AVO8C Overview

FPGA uses a nice 8-SOIC (0.154, 3.90mm Width) package that makes FPGA easy to use.External packaging for the Tube series.0°C~70°C license holder.OTP is the program that allows it to be programmed.This device is fed with a voltage of 3V~3.6V which is applied to it.There is a memory device mounted in Surface Mount position for this device.There is a limit of 500kb MB for the amount of data that can be stored.Look for "XC17S50A" for other related parts.The supply voltage of the device must be 3.3V in order to operate correctly.There are different functions that can be applied on the 8 axis when it comes to terminating.As long as the maximum voltage of the memory device is 3.6V, then the memory device can be used.FPGA is imperative that the voltage of the device supply is at least 3V if the device is to work properly.An example of a CONFIGURATION MEMORY memory chip can be seen in the picture below.The reflow soldering process should be done at a temperature no higher than 225.The 8 pins are on the board.The memory chip is allowed to operate at a voltage that is no greater than 0.015mA.As part of the package, the part comes with a set of 8 pins.There is a configuration of COMMON for the memory's I/O.Prior to the use of the part in a circuit, it is recommended that users apply the 3.3V to the part so that the part will run as safely and reliably as possible.This is an application suitable for Surface Mount-based operating systems.