STL13N60M2 [STMicroelectronics]

STL13N60M2 Overview

As an op amp's input capacitance parameter, CI, is defined as the capacitance between the input terminals when one input is grounded, this device's maximum input capacitance is 580pF @ 100V.This device conducts a continuous drain current (ID) of 7A, which is the maximum continuous current transistor can conduct.The drain current is the maximum continuous current this device can conduct, which is 7A.When the device is turned off, a turn-off delay time of 41 ns occurs as the input capacitance charges before drain current conduction commences.Before drain current conduction can begin, the device's turning-on delay time takes time to charge its input capacitance. This delay time is 11 ns.Voltage at the gate-source terminal of a FET transistor, called the gate-source voltage, or VGS, can be 25V.This transistor requires a drain-source voltage (Vdss) of 600V.In order to reduce power consumption, this device uses a drive voltage of 10V volts (10V).

STL13N60M2 Features

a continuous drain current (ID) of 7A
the turn-off delay time is 41 ns
a 600V drain to source voltage (Vdss)

STL13N60M2 Applications

There are a lot of STMicroelectronics
STL13N60M2 applications of single MOSFETs transistors.

• Motor drives and Uninterruptible Power Supplies
• Micro Solar Inverter
• DC/DC converters
• Power Tools
• Motor Drives and Uninterruptible Power Supples
• Synchronous Rectification
• Battery Protection Circuit
• Telecom 1 Sever Power Supplies
• Industrial Power Supplies
• PFC stages, hard switching PWM stages and resonant switching